System information

Program 15 : Extension, Basic Setup
15-02 : Multi-Line Terminal Basic Setup
230 ◆ Programming UX5000 Software Program Manual
12 Off Hook Ringing
Use this option to set the keyset’s off
hook signaling. Off hook signaling
occurs when a keyset user receives a
second call while busy on a handset
call. DID, DNIS and DIL trunks can
use any of the 4 options - normal/ring
group trunks can only use options “0”
or “1”. To enable/disable Off Hook
Signaling for an extension’s Class of
Service, use Program 20-13-06.
0 = Muted Off Hook Ringing
1 = No Off Hook Ringing
2 = Not Used
3 = One Beep in Speaker
4 = One Beep in Handset
0
13 Redial List Mode
Select whether the Redial List feature
should store internal and external
numbers (0), or only external numbers
(1).
0 = Extension/Trunk Mode
1 = Trunk Mode
1
14 -- Not Used -- 0
15 Storage of Caller ID for Answered
Call
Select whether an answered call
should be included in the Call History
Log.
0 = Disable
1 = Enable
1
16 Handsfree Operation
Enable or disable an extensions ability
to use the speakerphone on outside
calls. Users can hear the conversation,
but cannot respond handsfree.
0 = Disable
1 = Enable
1
17 -- Not Used --
18 Power Saving Mode
Enable or disable the power saving
mode for the keyset or IP terminal.
0 = Normal mode
1 = Power-saving mode
1 20-02-10
19 CTA/CTU Data Communication
Mode
Select ‘0’ if the dip switch settings on
the CTA/CTU Adapter are set to PC
connection (1=on, 2-8=off) or select
‘1’ if the dip switches are set to printer
connection (1-2=on, 3-8=off).
0 = CTI mode
1 = non-procedural/SMDR mode
0 15-02-20
20 Baud Rate for CTA Port
Select the baud rate to be used by the
CTA Adapter.
0 = 4800
1 = 9600
2 = 19200
2 15-02-19
Item
No.
Item Input Data Default
Related
Program