System information

Program 15 : Extension, Basic Setup
15-01 : Basic Extension Data Setup
226 ◆ Programming UX5000 Software Program Manual
Conditions
None
Feature Cross Reference
Refer to chart above.
04 ISDN Caller ID
If both Program 15-01-04 and
10-03-05 are enabled, the UX5000
includes Caller ID in the Setup mes-
sage as “Presentation Allowed”. If
these options are disabled, it will be
“Presentation Restricted”.
0 = Disable
1 = Enable
1 10-03-05
05 Restriction for Outgoing Disable on
Incoming Line
Enable or disable supervised dial
detection for an extension.
0 = Disable
1 = Enable
0 21-01-15
21-01-16
21-01-17
80-03-01
06 - Not Used - --
07 - Not Used - --
08 Busy Call Attendant Message for
Extension
For each extension set the message
number to be played for the Call
Attendant feature when the extension
is busy. When this option is used, Pro-
gram 40-10-08 must be set to "0"
(system-wide option).
0 = No Message
001-100 = VRS Messages 001 - 100
0 11-11-59
40-10-08
09 No Answer Call Attendant Message
for Station
For each extension set the message
number to be played for the Call
Attendant feature when the extension
does not answer. When this option is
used, Program 40-10-09 must be set to
"0" (system-wide option).
0 = No Message
001-100 = VRS Messages 001 - 100
0 11-11-60
40-10-09