System information

Introduction to Programming
Before You Start Programming
6 ◆ Programming UX5000 Software Program Manual
Using Soft Keys For Programming
Each UX5000 display terminal provides interactive soft keys for intuitive feature access. The
options for these keys will automatically change depending on where you are in the UX5000 pro-
gramming. Simply press the Soft Key located below the option you wish and the display will
change accordingly.
Pressing the VOLUME ▲ or VOLUME ▼ will scroll between the menus.
What the Soft Key Display Prompts Mean
When using a display terminal in programming mode, you will see various Soft Key options dis-
played. These keys will allow you to easily select, scan, or move through the programs.
_
Program Mode
Base Service OP1 OP2
❍ ❍ ❍ ❍
_
Program Mode
Hard Mtnance
❍ ❍ ❍ ❍
Soft key Display Prompts
If you press this Soft Key . . . The UX5000 will. . .
back
Go back one step in the program display.
You can press VOLUME ▲ or VOLUME ▼ to scroll
forwards or backwards through a list of Programs.
↑
Scroll down through the available programs.
↓
Scroll up through the available programs.
select
Select the currently displayed program.
←
Move the cursor to the left.
→
Move the cursor to the right.
−1
Move back through the available program options.
+1
Move forward through the available program options.