System information

Program 14 : Trunk, Basic Setup
14-01 : Basic Trunk Data Setup
202 ◆ Programming UX5000 Software Program Manual
25 Continue/Disconnect Trunk-to-Trunk
Conversation
When Program 24-02-10 is set to discon-
nect a trunk after the defined time, deter-
mine whether or not a user should have
the ability to use the continue/disconnect
code.
0 = Disable
1 = Enable
0 24-02-10
26 Automatic Trunk to Trunk Transfer
Mode
For each trunk, enable (1) or disable (0)
the Step Transfer function when using the
Automatic Trunk-to-Trunk Transfer fea-
ture. If this option is disabled, the call will
be forwarded to the first specified destina-
tion only.
0 = Disable
1 = Enable
0 24-04-01
27 Caller ID Refuse Setup
This program defines if the UX5000
rejects a trunk call and plays a VRS mes-
sage based on the Caller ID information
received. This option is set on a per trunk
basis.
0 = Does not reject the
call
1 = Rejects the call
0
28 -- Not Used --
29 -- Not Used --
30 Flexible Ringing by Caller ID
This option can be used to block the Flex-
ible Ringing by Caller ID feature on a per
trunk basis. Setting this option to "1"
enables the feature for the trunk, while "0"
disables the feature.
0 = Disable
1 = Enable
1 14-01-27
22-18
31 -- Not Used -- 0 = Disable
1 = Enable
0 13-04
20-09-10
32 Anti-Trombone
With networked H.323 trunks, enable or
disable the UX5000’s ability to release the
external H.323 trunks when a call is
placed across the network to an extension
which is forwarded back to the originating
UX5000. If enabled, in this situtation, the
call is changed from an external trunk call
to an internal call and the H.323 trunks are
released for other calls.
0 = Disable
1 = Enable
0
Item
No.
Item Input Data Default
Related
Program