System information

Program 14 : Trunk, Basic Setup
14-01 : Basic Trunk Data Setup
200 ◆ Programming UX5000 Software Program Manual
07 Outgoing Calls
Use this option to allow/prevent outgoing
calls on the trunk you are programming.
0 = Prevented
1 = Allowed
1
08 Toll Restriction
Use this option to enable/disable Toll
Restriction for the trunk. If enabled, the
trunk follows Toll Restriction program-
ming (ex: Programs 21-05, 21-06). If dis-
abled, the trunk is a toll free line.
0 = Restriction disable
1 = Restriction enable
1 21-04
21-05
21-06
09 Private Line
Use this option to enable/disable a trunk’s
ability to be used as a Private Line.
0 = Disable
1 = Enable
0
10 DTMF Tones for Outgoing Calls
Use this option to enable (1) or disable (0)
DTMF tones for outgoing trunk calls.
0 = Disable
1 = Enable
0
11 Account Code Required
Use this option to enable (1) or disable (0)
Forced Account Codes.
0 = Disable
1 = Enable
1
12 - Not Used - 1
13 Trunk-to-Trunk Transfer/Loop
Disconnect Supervision
Use this option to enable (1) or disable (0)
trunk-to-trunk transfer with loop supervi-
sion for the trunk. This option is required
for Call Forwarding Off-Premise and Tan-
dem Trunking (including 2 B-Channel
Transfer with PRI) only.
0 = Disable
1 = Enable
1
14 Long Conversation Cutoff
Use this option to enable or disable the
Long Conversation Cutoff feature for each
trunk.
0 = Disable
1 = Enable
0 20-21-03
20-21-04
15 Long Conversation Alarm Before Cut
Off
Use this option to enable or disable the
Long Conversation Alarm for each trunk.
0 = Disable
1 = Enable
0 20-21-01
20-21-02
16 Forced Release of Held Call
Use this option to enable/disable forced
release for calls on Hold. If enabled, the
UX5000 disconnects a call if it is on Hold
longer than a programmed interval (Pro-
gram 24-01-05). If disabled, forced dis-
connection does not occur. Program
24-01-01 also affects this option.
0 = Disable
1 = Enable
0 24-01-05
Item
No.
Item Input Data Default
Related
Program