System information

Program 14 : Trunk, Basic Setup
14-01 : Basic Trunk Data Setup
UX5000 Software Program Manual Programming ◆ 199
Program 14 : Trunk, Basic Setup
14-01 : Basic Trunk Data Setup
Description
Use Program 14-01 : Basic Trunk Data Setup to set the basic options for each trunk port. Refer
to the chart below for a description of each option, its range and default setting.
Input Data
Level:
Feature Availability
IN • Available.
Trunk Port Number 1-200
Item
No.
Item Input Data Default
Related
Program
01 Trunk Name
Set the names for trunks. The trunk name
displays at display keysets for incoming
and outgoing calls.
Up to 12 characters 1 = Line 001
|
Line 200 = Line 200
02 Transmit Codec Gain Type
Use this option to select the codec gain for
the trunk. The option sets the amount of
gain (signal amplification) for the trunk
you are programming.
1~63
(-15.5 ~ +15.5dB in
.5dB intervals)
32 (0dB)
03 Receive Codec Gain Type
Use this option to select the codec gain for
the trunk. The option sets the amount of
gain (signal amplification) for the trunk
you are programming.
1~63
(-15.5 ~ +15.5dB in
.5dB intervals)
32 (0dB)
04 Transmit Gain Level for Conference
and Transfer Calls
Use this option to select the codec gain
type used by the trunk when it is part of an
Unsupervised Conference.
1~63
(-15.5 ~ +15.5dB in
.5dB intervals)
32 (0dB)
05 Receive Gain Level for Conference and
Transfer Calls
Use this option to select the codec gain
type used by the trunk when it is part of an
Unsupervised Conference or Remote
Conference.
1~63
(-15.5 ~ +15.5dB in
.5dB intervals)
16 (-8dB)
06 SMDR Print Out
Use this option to have the UX5000
include/exclude the trunk you are pro-
gramming from the SMDR printout. See
Program 35-01 and 35-02 for SMDR
printout options.
0 = No print out
1 = Prints out
0