System information

Introduction to Programming

Before You Start Programming

UX5000 Software Program Manual Programming ◆ 3

How to Exit the Programming Mode

To exit the programming mode:

When you are done programming, you must be out of a program’s options to exit (pressing the MIC

key will exit the program’s option).

1. Press MIC key to exit the program’s options, if needed.

2. Press SPK. You see, "Saving System Data".

3. The display shows "Complete Data Save" when completed and will exit the terminal to an idle

mode.

To save a customer’s database, plug a USB thumb drive into the CPU and, using Pro-

gram 90-03, save the software to the USB drive. (Program 90-04 is used to reload the cus-

tomer data if necessary.) Note that a USB thumb drive can only hold one customer

database unless the ﬁles are moved into a separate folder on the thumb drive after it is

saved from the UX5000. Otherwise, the next time a database is saved, it will override the

existing database.

Users are automatically logged out of terminal programming and WebPro when there

is no activity based on the entry in Program 20-01-12.

Program Mode

Base Service OP1 OP2