System information

Program 11 : System Numbering
11-16 : Single Digit Service Code Setup
158 ◆ Programming UX5000 Software Program Manual
11-16 : Single Digit Service Code Setup
Description
Use Program 11-16 : Single Digit Service Code Setup to customize the one-digit Service Codes
used when a busy or ring back signal is heard. You can customize additional Service Codes in Programs
11-10 through 11-15. The following chart shows:
● The number of each code (01-11)
● The function of the Service Code.
● What type of terminals can use the Service Code
● The code’s default entry. For example, dialing 1 (code 03) when calling an extension will
switch the call from either a voice or signal call (depending on how it’s currently defined).
● Programs that may be affected by changing these codes.
If you change a Service Code, be sure to record your entry in the “New” column.
Entries can be digits 0-9, # and *. Be sure any changes do not conflict with other service codes. For
example, setting an option in this program to * will affect the default entry for the Forced Trunk
Disconnect service code, *3 (Program 11-10-26).
Input Data
Conditions
None
Level:
Feature Availability
IN • Available.
Item
No.
Item Default New
Related
Program
01 Step Call # 11-12-07
02 Barge In No Setting 11-12-08
03 Switching of Voice/Signal Call 1 11-12-06
04 Intercom Off Hook Signaling 7 11-12-03
05 Camp-On 2 11-12-04
06 DND/Call Forward Override No Setting 11-12-01
07 Message Waiting 0 11-11-09
08 Voice Over 6 11-12-41
09 Access to Voice Mail 8 11-12-51
10 STG All Ring Mode No Setting 16-01-05,
11-12-09
11 Personal Park No Setting 11-12-35