System information

Program 11 : System Numbering
11-15 : Service Code Setup, Administrative (for Special Access)
156 ◆ Programming UX5000 Software Program Manual
11-15 : Service Code Setup, Administrative (for Special Access)
Description
Use Program 11-15 : Service Code Setup, Administrative (for Special Access) to customize the
special access Service Codes which are used by the administrator in the Hotel/Motel feature. You can
customize additional Service Codes in Programs 11-10 through 11-14 and 11-16. The following chart
shows:
● The number of each code.
● The function of the Service Code.
● What type of terminals can use the Service Code.
● The code’s default entry.
● Programs that may be affected with the changing the code.
If you change a Service Code, be sure to record your entry in the “New” column.
Input Data
Level:
Feature Availability
IN • Available.
Item
No.
Item Terminals Default New
Related
Program
01 Remote Maintenance
Set the service code used in the dial-up number when
using the serial or USB port for PCPro or WebPro
830
02 ACD Access in Dial-In Conversion Table 860 22-04
22-11
03 Backup Data Save
This option will save the user’s soft key settings
(extension’s programmed Call Forwards, DND, etc.).
It is recommended to use this feature before upgrad-
ing the UX5000 software.
KTS #*#9
04 Not Used
05 UX5000 Programming Mode, Log-On KTS #*#* 11-01
06 Wake on LAN to APSU Unit KTS No Setting 10-22
07 - Not Used -
Recording Destination in Dial-In Conversion Table
No Setting
08 Network Message Lamp Control 866
09 Transfer to Trunk Ring Group Code
Allows a call to be transferred to a trunk ring group
or External Paging zones.
KTS, SLT No Setting 22-05-01
25-06-02
31-05-01
10 - Not Used - --
11 Ethernet Port Reset No Setting