System information

Program 11 : System Numbering
11-10 : Service Code Setup (for System Administrator)
142 ◆ Programming UX5000 Software Program Manual
15 Not Used - - - -
16 Leaving Message Waiting KTS 126 11-11-09
17 Dial Block by Supervisor KTS 101 90-19
18 Off-Premise Call Forward by Door Box KTS 822 13-05
19 Not Used - - -
20 VRS - Record/Erase Message KTS 116 20-07-13
21 VRS - General Message Playback KTS 111 20-07-14
22 VRS - Record or Erase General Message KTS 112 20-07-15
23 SMDR - Extension Accumulated Printout Code KTS 121 20-07-18
24 SMDR - Group Accumulated Printout Code KTS 122 20-07-19
25 Account Code Accumulated Printout Code KTS 123 20-07-20
26 Forced Trunk Disconnect KTS, SLT *3 20-07-11
27 Trunk Port Disable for Outgoing Calls
Define the service code to be used to block/release a
trunk.
KTS 145 20-07-12
28 Not Used - - -
29 Not Used - - -
30 Not Used - - -
31 Not Used - - -
32 Set Private Call Refuse
Define the service code to be used to set the “Private”
call refusal for the trunks which are programmed in
Program 14-01-27 to 1.
KTS, SLT No Setting 14-01-27
33 Enter Caller ID Refuse
For keysets only, define the service code to be used to
add or delete the Caller ID numbers to be refused.
KTS, SLT No Setting 14-01-27
34 Set Caller ID Refuse
Define the service code to be used to enable/disable
the Caller ID call refusal for the trunks which are pro-
grammed in Program 14-01-27 to 1.
No Setting 14-01-27
35 DID Mode Switching
Assign the service code to be used to manually change
the time pattern for a DID number.
KST, SLT No Setting
36 - Not Used - --
37 - Not Used - --
Item
No.
Item Terminals Default New
Related
Program