System information

Program 11 : System Numbering
11-10 : Service Code Setup (for System Administrator)
UX5000 Software Program Manual Programming ◆ 141
11-10 : Service Code Setup (for System Administrator)
Description
Use Program 11-10 : Service Code Setup (for System Administrator) to customize the Service
Codes for the System Administrator. You can customize additional Service Codes in Programs 11-11
through 11-16. The following chart shows:
● The number of each code (01-27)
● The function of the Service Code.
● What type of terminals can use the Service Code
● The code’s default entry. For example, dialing *3 (item 26) allows users to force a trunk line
to disconnect.
● Programs that may be affected with the changing the code.
If you change a Service Code, be sure to record your entry in the “New” column.
Input Data
Level:
Feature Availability
IN • Available.
Item
No.
Item Terminals Default New
Related
Program
01 Day / Night Mode Switching KTS, SLT 818 12-xx
20-07-01
02 Changing the Music on Hold Tone KTS 881 10-04
03 Setting the UX5000 Time KTS 828
04 Storing Common Abbreviated Dialing Numbers KTS 853
05 Storing Group Abbreviated Dialing Numbers KTS 854
06 Setting the Automatic Forwarding for Each Trunk
Line
KTS 833 24-04-01
07 Canceling the Automatic Forwarding for Each Trunk
Line
KTS 834 24-04-01
08 Setting the Destination for Automatic Trunk Forwarding KTS 835 24-04-01
09 Not Used No Setting
10 Not Used - - - -
11 Entry of Credit for Toll Restriction - Not Used No Setting
12 Night Mode Switching for Other Group KTS 118 12-xx
20-07-01
13 Not Used - - - -
14 Not Used - - - -