System information

Program 10 : System Configuration Setup
10-41 : General Purpose Contact Detector Setup
UX5000 Software Program Manual Programming ◆ 95
10-41 : General Purpose Contact Detector Setup
Description
Use Program 10-41 : General Purpose Contact Detector Setup to specify the circuit number
used on a 2PGDAD as a contact detection circuit.
Input Data
Conditions
None
Feature Cross Reference
Analog Communications Interface (ACI)
Level:
Feature Availability
IN • Available.
General Purpose Contact Detector Number 1-8
Item
No.
Item Input Data Default
Related
Program
01 Slot Number
Define the slot number of the ESIU to which the
2PGDAD is connected
0 = No Setting
1-24 = Slots 1-24
0
02 Physical Port Number
Select the port number on the ESIU to which the
2PGDAD is connected.
0 = No Setting
1-16 = Ports 1-16
0
03 Relay Circuit Number
Select the relay circuit on the 2PGDAD module.
0, 5-8 0