System information

Program 99 : Manufacturer Options
99-02 : Nondisclosure Options Firmware Download
1024 ◆ Programming UX5000 Software Program Manual
99-02 : Nondisclosure Options Firmware Download
Description
Use Program 99-02 : Nondisclosure Options Firmware Download to downgrade a particular
blade’s firmware.
This option is only available through terminal programming. It is only recommended to downgrade
firmware when advised by NEC’s Technical Service department.
In order to downgrade a blade’s firmware, you will need to copy a older version of firmware to the
“Firmware” directory onto the USB which will be inserted into the CCPU.
Note: Do not insert the USB flash drive into the CCPU with the power on as certain
versions may cause the CCPU to reset.
To determine the correct file to move to the USB flash drive, refer to the following format:
● First 2 digits = Last 2 characters of the blade ID
● Next 2 digits = Firmware version (for example “12” equals “version 1.2”
● Last 2 digits = Order of file and total number of numbers (for example, 16 means that the file
is the first file and the firmware is divided into 6 files)
If a firmware file consists of several files, each file will be copied automatically from
the USB. If there are multiple files for a blade, be sure to copy all the blade firmware files
to the USB flash drive.
Input Data
Level:
Feature Availability
IN • Available.
Package Type Blade Type (Real Unit ID): 0-255
ESIU: 18
Combo: 27
SLIU: 32
COIU: 48
DIOPU: 64
TLIU: 80
BRIU: 96
PRIU: 112
T1IU: 114
CSIU: 144
E1IU: 148
VMS: 160
IVR: 164
UMS: 163
CNF: 165
VOIPU: 177
GSWUB: 183
GSWUE: 185
VOIPDB: 180
RTU(J): 181
RTU(N): 182
APSU: 192
CCH: 208
Blade ID:
ESIU: 0x012
Combo: 0x01B
SLIU: 0x020
COIU: 0x030
DIOPU: 0x040
TLIU: 0x050
BRIU: 0x060
PRIU: 0x070
T1IU: 0x072
CSIU: 0x090
E1IU: 0x094
VMS: 0x0A0
IVR: 0x0A4
UMS: 0x0A3
CNF: 0x0A5
VOIPU: 0x0B1
GSWUB: 0x0B7
GSWUE: 0x0B9
VOIPDB: 0x0B4
RTU(J): 0x0B5
RTU(N): 0x0B6
APSU: 0x0C0
CCH: 0x0D0