System information

Program 99 : Manufacturer Options
99-01 : MF Options
1022 ◆ Programming UX5000 Software Program Manual
Conditions
None
Feature Cross Reference
● Maintenance
● Park
● Time and Date
● Voice Mail
56 Terminal Pro Operation Mode Setting
<Aspire Keyset Only>
This option is used to change the opera-
tional mode of terminal programming
(key operation and cursor initial position)
to the UX5000 mode (MIC key used to
exit program option and cursor on first
line) or to change to the Aspire mode
(MSG key used to exit program option
and cursor on second line).
Note: Changing this option when
UX5000 keysets are used for program-
ming will cause difficulties in program-
min as there is no MSG key which is
required to escape from a program
option (the HOLD key must be continu-
ally pressed until all options of the pro-
gram have been scrolled through).
• 0 = UX5000 Mode
• 1 = Aspire Mode
0 99-01-69
69 Terminal Programming Initial
Cursor Position
Determine the location of the cursor when
in the terminal program mode. Selecting
UX5000 Mode (0) will place the cursor
on the first line, selecting Aspire Mode (1)
will place the cursor on the second line.
• 0 = UX5000 Mode
• 1 = Aspire Mode
0 99-01-56