System information

Program 92 : Copy Program
92-04 : Extension Data Swap
UX5000 Software Program Manual Programming ◆ 1011
Input Data
21-18 IP Trunk Calling Party Number Setup for Extensions
21-19 IP Trunk (SIP) Calling Party Number Setup for Extensions
21-20 SIP Trunk Call Discernment Setup for Extensions
22-04 Incoming Extension Ring Group Assignment
22-06 Normal Incoming Ring Mode
23-02 Call Pickup Group
23-03 Ringing Line Preference
23-04 Ringing Line Preference for Virtual Extensions
24-03 Park Group Assignment
24-06 Fixed Call Forwarding
24-07 Fixed Call Forwarding Off-Premise
24-08 Call Forwarding for Centrex
26-04 ARS Class of Service
26-07 Not used in U.S.
31-02 Internal Paging Group Assignment
41-02
ACD Group and Agent Assignments
41-17
ACD Login Mode Setup
42-02 Hotel/Motel Terminal Setup
90-28 User Programming Password Setup
92-05 Data Swap Password of each Extension Setup
Item No. Item Input Data
01 Extension Data Swap
Enter the two extension numbers which should
be swapped. After pressing HOLD, the UX5000
data for the programs listed in the table above
will be swapped. Any user-defined program-
ming stored in the SRAM will not be swapped
(for example, Call Forward set up, Selectable
Display Messaging, etc.).
Extension Number 1:
Extension Number
(max. 8 digits)
Extension Number 2:
Extension Number
(max. 8 digits)