System information

Program 92 : Copy Program
92-01 : Copy by Extension Number
UX5000 Software Program Manual Programming ◆ 1001
Program 92 : Copy Program
92-01 : Copy by Extension Number
Description
Use Program 92-01 : Copy by Extension Number to copy the data for one program to another
keyset, trunk, group, etc. Refer to the following charts to see which programs can be copied.
Input Data
Level:
Feature Availability
IN • Available.
Program Number XX-XX
Item
No.
Item Input Data
01 Source Number
Enter the extension, trunk, group, etc.
from which the data will be copied.
• With Trunks:
Trunk Port Number 1-200
• With Trunk Group :
Trunk Group Number 1-100
• With Extension :
Extension Number (up to 8 digits)
• With Department Group :
Department Group Number 1-64
• With DSS Console:
DSS Console Number 1-4 or 1-32
Destination Number (From)
Enter the first extension, trunk, group,
etc. number to which the information is
to be copied.
Destination Number (To)
Enter the last extension, trunk, group,
etc. number to which the information is
to be copied. If the information is only
be copied to one extension, trunk,
group, etc., enter the information
entered in the Destination Number
(From) entry.