Specifications

Administration
A31003-O1010-M100-17-76A9, 18/05/2010
3-94 OpenScape Voice - OpenStage Family, Administration Manual
administration.fm
Multiline Appearance/Keyset
Data required
• Key label <n>: Set the label of the line key with the key number <n>.
Default: "Line"
• Primary line: Determines whether the line is the primary line.
Value range: "Yes", "No"
Default: "No"
• Ring on/off: Determines whether the line rings on an incoming call.
Value range: "On", "Off"
Default: "On"
• Ring delay: Time interval in seconds after which the line starts ringing on an incoming call.
Default: 0
• Selection order: Priority assigned to the line for the selection of an outgoing line.
Default: 0
• Address: Address/phone number which has a corresponding entry on the SIP server/
registrar.
• Realm: Domain wherein user id and password are valid.
• User Identifier: User name for authentication with the SIP server.
• Password: Password for authentication with the SIP server.
• Shared type: Determines whether the line is a shared line (shared by multiple endpoints)
or a private line (only available for this endpoint).
Value range: "shared", "private", "unknown".
Default: "shared"
• Hot/Warm line type: Determines whether the line is a hot line or a warm line.
Value range: „hot line“, „warm line“
• Hot/Warm line destination: Number to be dialed when the phone is in hotline or warmline
mode.
• Allow in Overview: Determines whether the line appears in the phone’s line overview.
Value range: "Yes", "No"
Default: "Yes"
• Hot warm action (V2): Determines if the line is a regular line, a hot line, or a warm line.
Value range: "No action", "hot line", "warm line"
• Hot warm destination (V2): The destination to be dialed from the hot/warm line when the
user goes off-hook.
>
A new line key can only be added by use of the WBM or, preferably, the DLS. Once
a line key exists, it can also be configured by the local menu.