Manualshelf

Specifications

ManualsBrandsDLS ManualsComputer equipmentDSS 26
131132133134135136137138139140
Administration
A31003-O1010-M100-17-76A9, 18/05/2010
3-88 OpenScape Voice - OpenStage Family, Administration Manual
administration.fm
Free Programmable Keys
In the Parameters field, one or more key/value pairs in the format "<key>=<value>" can be
added to the request, separated by an ampersand (&).
Example: phonenumber=3338&action=huntGroupLogon
The Method parameter determines the HTTP method to be used, which can either be GET or
POST. If GET is selected, the additional parameters (Parameters) and the user id/password
(Web server user ID/Web server password) are part of the URL. If POST is selected, these
data form the body of the message.
In case the web server requires user authentication, the parameters Web server user ID and
Web server password can be used. If not null, the values are appended between the server-
side path (Path) and the additional parameters (Parameter).
If the LED controller URI is given, the LED associated with this key indicates the state of the
call number or SIP URI specified, provided the SIP server sends a notification:
• Busy notification: LED is glowing.
• Ringing notification: LED is blinking.
Data required
• Key label <n>: Label for the key.
• Protocol: Transfer protocol to be used.
Value range: "HTTP", "HTTPS"
• Web server address: IP address or DNS name of the remote server.
• Port: Target port at the server.
• Path: Server-side path to the function.
• Parameters: Optional parameters to be sent to the server.
• Method: HTTP method used for transfer.
Value range: "GET", "POST"
• Web server user ID: User id for user authentication at the server.
• Web server password: Password for user authentication at the server.
• LED controller URI: Indicates the state of the call number specified.
>
The question mark will be automatically added between the path and the parame-
ters. If a question mark has been entered at the start of the parameters, it will be
stripped off automatically.
>
When assigning the function described here to the release key s, please consider
that this key has no LED.