Specifications

Administration
A31003-O1010-M100-17-76A9, 18/05/2010
3-58 OpenScape Voice - OpenStage Family, Administration Manual
administration.fm
Features - Configuration
3.6.2 Hot/Warm Phone (V2)
With firmware V2, hot/warm phone functionality is available. If the phone is configured as hot
phone, the number specified in Hot warm destination is dialed immediately when the user
goes off-hook. For this purpose, Hot warm phone must be set to "Hot phone". If set to "Warm
phone", the specified destination number is dialed after a delay which is defined in Initial digit
timer (seconds) (for details, see Section 3.6.3, “Initial Digit Timer”). During the delay period,
the user can dial a number which will be used instead of the hot/warm destination. In addition,
the user will be provided with a dial tone during the delay period. With the setting "No action",
hot phone or warm phone functionality is disabled.
Administration via WBM
System > Features > Configuration
Administration via Local Phone
|
--- Administration
|
--- System
|
--- Features
|
--- Configuration
|
--- General
|--- Hot / warm phone
|--- Hot / warm destination
|
--- Initial digit timer