Specifications

Specifications
DLS Performance CAT31 - 24 Volt
Number of channels 3
Stereo Channels: Ch A & B
RMS power out in 4 ohm ( 0,1% THD) 2 x 75 Watt
RMS power out in 2 ohm ( 0,1% THD) 2 x 145 Watt
RMS power out in 1 ohm ( 0,5% THD) 2 x 210 Watt
RMS power out in 4 ohm bridged mode 1 x 280 Watt
Filters high pass 50 – 150 Hz
Mono Channel: Ch C
RMS power out in 4 ohm 1 x 170 Watt
RMS power out in 2 ohm 1 x 280 Watt
Filter subsonic 24 dB slope 25 Hz fixed*
* can be switched in or out
Filter low pass 24dB slope 50 – 120 Hz
Phase control mono channel continuous var. 0 – 180 degrees
All above output power ratings at 28V DC
Input impedance, low level (RCA ) > 10 kohm
Input impedance, high level 100 ohm
Input sensitivity, low level ( RCA ) 0,25 – 5 V
Frequency range 10 Hz – 35kHz
Signal to noise ratio, A-weighted > 90 dB
Power consumption, idle / max 0,7 A / 40 A
Fuses 2 x 20 A
Dimensions, mm 70 x 400 x 268
Dimensions, inches 2,92 x 15,75 x 10,55
Weight 4,8 kg / 10,58 lb
DC voltage range 24 – 30 V DC
Remote voltage range 12 – 30 V DC
We follow a policy of continuous
advancement in development.
For this reason all or part of
specifications & designs may be
changed without prior notice.
10