User manual

ASURO - 35
-
PART III. Software
8. Software installation and initial steps
Insert the ASURO CD. When all is OK it will start automaticaly otherwise open it with windows
explorer. After the language selection you will  nd all the programs you need for the ASURO
under the software menu. Before you can work with them you have to install the program on your
hard drive  rst. To install programs on your hard drive you need administrator rigths, when you are
not logged in as administrator log out and log on again as administrator.
During the software installation we will do the following things:
1.
Flash-Tool, a program to transmit your own program to ASURO, will be installed.
2.
A program editor (Programmers Notepad 2, PN2) and a Compiler (WinAVR) will be
installed.
3.
An example program(s) will be copied from CDRom to your hard disk.
4.
We will create, in program editor (PN2), a menu input for Make and Clean  les.
8.1 WINDOWS
8.1.1 FLASH tool
Copy the  ash program in a folder on your hard drive for example C:\programs\ ash.
It is also possible the run the  ash program directly from the CD.
In all cases it is wise to make a link for the  ash program on your desktop.
8.1.2 Installation of the program editor and compiler
For the installation of the compiler you must be the administrator of your computer (during the
installation the registry will be changed). When you are not registered as the administrator restart
the computer and start up as administrator!
Click on the install symbol to install.
COMPILER WinAVR (20030913)
When nothing happens try to open the CD with windows exporer.
WINDOWS is
the trade mark of Microsoft Corporation.