Specifications

Copyright Peek Traffic Systems Incorporated, 2000
21
COMM SET-UP
SYSTEM PORT SET-UP (MM-2-6-1)
SYSTEM PORT SYSTEM #
SYSTEM TYPE UNIT ADDRESS
System Port: 0 = Fsk Modem, 1 = RS-232A, 2= RS-232B
System Type: 0 = LM100 (1200 baud), 1 - 4 = 1200, 2400, 4800, 9600 for
MIST or MATS
System #: 0 - 99 = Master Zone ID number (automatic w/MDM100))
Unit Address: 0 - 64 = Unit address number
NON-SYSTEM PORT SET-UP (MM-2-6-1-PgDn)
DIAL MODE PRINTER PARITY
COMM MODE PRINTER BAUD
(DIRECT DIAL) //////// MONITOR PORT
Dial Mode: 0 = RS2-232 null, 1 = Hayes, 2 = UDS, 3 = 202 or MDM100
Comm Mode: 0 = LM SYS, 1-4 = MATS 1200, 2400, 4800, 9600 baud
Printer Parity: 0 = 7 bit no parity, 1 = 7 bit odd, 2 = 7 bit even, 3 = 7 bit
space or 8 bit none
Printer Baud: 300, 1200, 2400, 4800, 9600
Monitor Port: 1 = RS-232A, 2 = RS-232B
PHONE NUMBERS (MM-2-6-2)
PRIMARY
SECONDARY
Special characters: P = pulse, T= Tone, comma = pause, W = Wait for DT
To insert special characters, hit decimal point, move cursor to desired
character on display screen, then hit decimal again.
MODEM INITIALIZATION STRING(MM-2-6-2-PgDn)
Use left & right arrows to move to desired character. Use up/down arrows to
scroll through alphabet and special characters.
.
SPECIAL FUNCTION CKT MAPPING (MM-2-6-3-PgDn, etc.)
FUNCT
1 2 3 4 5 6 7 8
CIRCUIT
DELAY
FUNCT
9 10 11 12 13 14 15 16
CIRCUIT
DELAY
FUNCT
17 18 19 20 21 22 23 24
CIRCUIT
DELAY
For system use. Function bits 1-24 issued from central via comm. Function
bit is mapped to a clock circuit to initiate a specific action. Delay range: 0-9.9
or 127. Delay is from receipt of function bit to activation of ckt.
SYSTEM WIDE MAP SIGNAL ASSIGNMENTS (MM-2-6-4)
SIG1 SIG2 SIG3 SIG4 0 = Signal not used
1-8 = ph/s 1-8, 9-12 = O/L A-D
The system wide map can support up to 4 signal colors as assigned.
TBC BACK-UP DELAY TIME (MM-2-6-5)
DELAY 0 -255 minutes. Determines delay period from
lost carrier (lost comm) to when TBC takes over
NOTES