Specifications

TIME CLOCK

DAYLIGHT SAVINGS, RESET TIME, COORD OUT (MM-2-4-2)

DLS (ON/OFF) CLOCK RESET TIME COORD OUT

: :

DLS: ON = Clock will spring forward and fall back automatically for DLS

OFF = Clock will not adjust for daylight savings

Clock Reset = Time of day the clock will be set to on “time clock

Time sync” input toggle (trailing edge)

Coord: 0 = Coord outputs follow only TOD coord clock programming

regardless of actual select mode

1 = Coord outputs follow active coord commands unit is

responding to (TOD, INT, COMM)

SYNC REFERENCE MODE (MM-2-4-3)

MODE

Determines how clock derives coord cycle sync pulses from time base (2 = most

common mode used):

1 = End of previous cycle (1st sync at midnight, then each new selected cycle

references to end of current cycle--this mode is event history sensitive)

2 = Independent daily reference (each cycle has own, independent reference

back to daily cycle zero time--this mode is not event history sensitive)

3 = Absolute reference (one time reference, then runs continuous w/no daily

resync, usually used to sync to free running electro-mechanical dials)

4 = Event reference (cycle timer resyncs to zero each time a new cycle called for

by clock event--this mode is event history sensitive)

INDEPENDENT CYCLE ZERO TIMES (MM-2-4-3-PgDn)

C1 : :

C2 : :

C3 : :

C4 : : C5 : : C6 : :

C7 : :

C8 : :

/ / / / / / / / / / / / /

Range: 6 digit time of day. 00:00:00 to 23:59:59

EXCEPTION DAYS (MM-2-4-4) (DP = Day Program)

DESCRIPTION EX DAY DOW WOM or DOM MOY DP

Use DOM, MOY for date specific events (Christmas), Use DOW WOM for events that

fall on a specific day of a certain week (e.g. “Monday Holidays”).