Specifications

Copyright Peek Traffic Systems Incorporated, 2000
5
MAX PLANS (MM-2-2-6-5-2-PgDn, etc.)
Called by Clock or Cyc/Spl (override normal max times when
in effect)
MAX TIME MODE
1. Normal max is used when a plan is in effect with no detector failures.
PHASE 1 2 3 4 5 6 7 8 2. Fail Max is used when a max plan is in effect and there is a failure on a
MODE detector and “Max Fail Recall” is applied to the phase (see det. monitoring)
0 = use normal Nema times only, 1 = allow max plan selection by TOD/Coord 3. Cyc/Spl overrides clock ckt when both are calling for a max time plan.
MAX TIME PLAN 1 MAX TIME PLAN 5
PHASE 1 2 3 4 5 6 7 8 PHASE 1 2 3 4 5 6 7 8
NORMAL MAX NORMAL MAX
FAIL MAX FAIL MAX
MAX TIME PLAN 2 MAX TIME PLAN 6
PHASE 1 2 3 4 5 6 7 8 PHASE 1 2 3 4 5 6 7 8
NORMAL MAX NORMAL MAX
FAIL MAX FAIL MAX
MAX TIME PLAN 3 MAX TIME PLAN 7
PHASE 1 2 3 4 5 6 7 8 PHASE 1 2 3 4 5 6 7 8
NORMAL MAX NORMAL MAX
FAIL MAX FAIL MAX
MAX TIME PLAN 4 MAX TIME PLAN 8
PHASE 1 2 3 4 5 6 7 8 PHASE 1 2 3 4 5 6 7 8
NORMAL MAX NORMAL MAX
FAIL MAX FAIL MAX
Value ranges: 0-255 seconds
NOTES