Specifications

DLI 8800 PRODUCT MANUAL PAGE 34/44 Rev. 4
Front Panel
Solid green Connection LED indicates connection established with Terminal.
Back Panel
The I/O and the power supply connector are located on the back of the unit.
Power Supply Connector
The connector is to be used with the DLI series of power supplies. Please see below for a
reference of recommended power sources.
The Cradle can be powered by an external DC power source of 18VDC~22VDC.
Verify that the power source is always within the specification range and
observe correct input voltage polarity. An improper input voltage range
above 22VDC or reverse polarity could damage the power conversion
circuitry.
Button Release to
Disengage the Unit
from the Cradle
Latches
Cradle Interface
Connection LEDs
Power Supply
Connector
Lock