Specifications

DLI 8800 PRODUCT MANUAL PAGE 29/44 Rev. 4
Using the USB
 Has two standard USB, industrial grade connectors. Only DLI authorized peripherals
should be attached to these USB ports. The USB port power is rated to 1A.
USB Port
1 2 3 4
Using the RS-232 DB9M
The integrated RS-232 Port can be configured to work with many peripherals including Barcode
Scanners, Printers, ODBII (Vehicle Interface), and Remote Monitoring apparatuses. To configure
the RS-232 port so that the data is sent to the keyboard buffer, the following procedure is required.
This procedure is typically used when using an external barcode scanner on the device.
All DLI Devices have power to Pin 9.
DO NOT plug-in or unplug any serial devices while the DLI Device is powered on!
Left Panel
1. Open the Control Panel, tap Start>Control Panel.
2. Tap on Accessibility Options Icon.
3. Chose the General Tab to configure the RS-232 port and check Use Serial Keys. Tap
the Settings button to access the Baud Rate and COM port that will be configured.
Pin #
Description
1
(+5V)
2
Data +
3
Data -
4
GND
Pin
Description
1
DCD
2
TXD
3
RXD
4
DSR
5
GND
6
DTR
7
CTS
8
RTS
9
+5V
1 2 3 4 5
6 7 8 9
Serial
Port