Rev.
Disclaimer Data Ltd., Inc. (DLI) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult DLI to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of DLI.
Using the RS-232 DB9M ............................................................................................................... 29 Using the Barcode Scanner ........................................................................................................... 32 Biometric Reader ........................................................................................................................... 32 DLI 8800 Desktop Cradle ......................................................................
Hardware Overview Front Panel Power LED Mag Stripe Reader Barcode Scanner LED MSR LED RFID LED Bluetooth Radio LED Battery Status LED Microphones LCD with Touch Panel Impact Resistant Case Speaker Biometric Reader / Mouse Function Keys DLI 8800 PRODUCT MANUAL PAGE 4/44 Rev.
Front Panel Status Indicator Lights The front panel includes status indicator lights for the following: Power On / Off Barcode Scanner MSR (Magnetic Stripe Reader) RFID Bluetooth Radio Battery Status Indicator Light Power Status Solid Green Description Powered On Barcode Scanner Solid Red Flash Green Scanning Good Scan MSR Solid Green Flash Green Flash Red On Good Read Bad Read RFID Solid Green Solid Amber Flash Green On Searching Good Read Blinking Blue No Light Enabled Disabled o
Bottom Panel Feature Cradle Interface Connector. When seated in a DLI 8800 peripheral, the terminal is powered, the batteries charged, and communication occurs via this connector. All DLI 8800 peripherals are designed to work exclusively with his connector. 8800 Cradle Interface TOP Pin# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 DLI 8800 PRODUCT MANUAL Description GND GND +20V DOCKING LAN TRL3+ +20V DOCKING LAN TRL3+20V DOCKING LAN TRL2+ +3.3VS DOC LAN TRL2+3.
Side Panels Left Side Right Side Programmable Button Programmable Button Master Reset Button USB Ports DB-9m (RS-232) Ethernet Port AC Power On/Off Button Side Panel Features Standard Ethernet Port (RJ-45) Standard Serial Port (RS-232 DB9) See Page. 29 Standard USB, industrial grade connectors. Only DLI authorized peripherals should be attached to these USB ports. The USB port power is rated to 1A. DLI 8800 PRODUCT MANUAL PAGE 7/44 Rev.
Back Panel Impact Resistant Case Main Battery Hard Drive Bay Top Panel Imager Window Setting Up the DLI 8800 Terminal 1. 3. 4. 5. Unpack the carton and verify its contents. – Page 9 Charge the battery for 3hrs. Power on the terminal via the power button on the left side of the terminal. Let the device load and end on the Desktop screen. DLI 8800 PRODUCT MANUAL PAGE 8/44 Rev.
Unpack the Carton and Verify its Contents Verify that the carton contains the following items: • • DLI 8800 Industrial Tablet Computer (terminal) DLI 8800-BAT Battery If you ordered peripherals and/or accessories, verify that they are also included with the order. Be sure to keep the original packaging in case the DLI 8800 needs to be returned for service– See page 37.
Checking the Battery Power The battery power can be checked from two areas on the DLI 8800. The battery icon will provide a graphical representation of the remaining battery power. 1. Tap on the battery icon in the system task bar. 2. The power meter is also accessible via the control panel, tapping on power options and choosing the power meter tab Power Management Utility The DLI 8800 includes a comprehensive suite of power management functions.
Adjusting the Backlight Brightness levels of the liquid crystal display (LCD) are adjustable based on the lighting conditions. By default the level is set to 7. (0 being the lowest and 7 being the highest level) To adjust the level of backlight: Start>Control Panel. Choose the DLI Brightness icon. Tap “-” or “+” to adjust the brightness. The settings are auto saved after adjustment. Tap Options>Place in system tray for quick access to this utility. DLI 8800 PRODUCT MANUAL PAGE 11/44 Rev.
Using the Stylus Calibrating and Using the Stylus Calibration ensures the accuracy of the stylus and adjusts the input angle for each person who uses it. The terminal stores calibration data and settings on a per-user basis. The stylus functions as a mouse; generally, a tap is the same as a mouse click. Tap: Drag: Right Mouse Click: Tap the touch screen once to open menu items and select options. Hold the stylus on the screen and drag across the screen to select text and images.
4. Tapping on the Calibration button will prompt the user to tap multiple points on the screen. 5. Hold the stylus naturally as if you were writing with a ball point pen, holding the stylus down on each red point as they appear. During calibration, position the terminal as close to the way you would use it. DLI 8800 PRODUCT MANUAL PAGE 13/44 Rev.
6. After completion the screen returns to the Standard Calibration window. Selecting OK will save the settings. Tapping Standard Calibration will start the process again. 7. The calibration is now complete and the PenMount Control Panel window is displayed. Select OK to close the application down. The PM icon will still be present in the system tray for quick configuration should your touch screen need recalibration.
2. The DLI KeyMon screen is presented. Choose a key that requires a definition by tapping on the orange keys or by highlighting the key in the button assignment area and then double tapping. 3. There are 5 options for key assignment. Choose the assignment that is required for the key. 4. To assign an application choose External program and tap on the browser icon. (See page. 16) DLI 8800 PRODUCT MANUAL PAGE 15/44 Rev.
Browser Icon 5. The user is returned to the assign menu once the selection has been chosen from the browser icon. Selecting the apply button saves the change to the key. The path to the application will appear in blue below the Current Assignment: DLI 8800 PRODUCT MANUAL PAGE 16/44 Rev.
6. To select a predefined action or keystroke choose Command and tap the down arrow to display a drop menu. 7. The drop menu has a list of various actions and keystrokes to choose from. Once you have selected the command, tap the apply button to save. 8. The DLI KeyMon program can be used to send data received by the Mag Stripe Reader (MSR) to the keyboard buffer. To setup your MSR to forward data, Select Tools then MSR Setup or by highlighting the MSR in the button assignment area and then double tapping.
9. The default MSR Data Properties are 19200 Baud Rate and COM2 for the Com Port. 10. To Close the DLI KeyMon tap on the “X” on the top right of the Main Window. SIM Card Insertion The SIM Card Slot is located in the battery bed of the Main Battery. The SIM Card Slot is intended for use of the MC8790 (GPRS Wireless Radio) ONLY. If you are unaware of what type of WWAN Radio you have please contact DLI Technical Support; (800) 526-1299 x774 or support@dataltd.com.
Using the WiFi Radio The DLI 8800 has two WiFi options. First is a PCI Intel 802.11a/b/g integrated radio. The other is a USB 802.11a/b/g/n integrated radio. Each radio is configured using either the Intel WiFi Connection Utility or Ralink Wireless Utility (RaUI).
If the SSID is broadcasted and no securities are found, you will connect. Connection is indicated by the blue Intel icon next to the network. Ralink USB Integrated Radio Start the Ralink Wireless Utility by double tapping on the Ralink icon( R+) found in the task tray. (Right clicking on the icon allows for additional options such as using WZC or exiting Ralink.) The Ralink utility window will pop up showing the Network tab and the available networks. DLI 8800 PRODUCT MANUAL PAGE 20/44 Rev.
Highlight a network and click the "Connect" button. If the SSID is broadcasted and no securities are found, you will connect. Connection is indicated by the blue triangle next to the network. Using the Bluetooth Radio The internal Bluetooth Class II wireless radio in the DLI 8800 is disabled by default. Microsoft™ Bluetooth software comes pre-installed on your terminal. Enabling the Bluetooth Radio To enable the Bluetooth radio, follow the instructions below: 1.
2. Select Open Bluetooth Settings. 3. From the tabs at the top of the screen choose the Hardware tab. Tap on the Properties button. DLI 8800 PRODUCT MANUAL PAGE 22/44 Rev.
4. Select the Enable Device button. The enable device wizard will appear. Select the Next button. This may take a few seconds. The Bluetooth LED on top of the terminal will begin to flash when the radio is turned on. 5. Select the Finish button to end the installation process. Tap the OK button at the Bluetooth properties screen. DLI 8800 PRODUCT MANUAL PAGE 23/44 Rev.
6. Tap the OK button to finalize the enabling process. Bonding an Accessory to the DLI 8800 To bond a Bluetooth device to the DLI 8800 the icon in the system tray offers shortcuts to the Bluetooth Settings window; the Bluetooth File Transfer Wizard and the Add New Connection Wizard. Press and hold the stylus on the Bluetooth icon to open the Bluetooth device menu. DLI 8800 PRODUCT MANUAL PAGE 24/44 Rev.
The following process is generally common for connecting most Bluetooth devices (keyboard, mouse, printer, cellular phone, PDA, Tablet PC, notebook PC, etc.). The actual steps may be slightly different for every type and brand of Bluetooth device. Read and follow the installation instructions included with your specific device. These are the four generic steps for connecting to a Bluetooth device. 1. 2. 3. 4.
4. Place the Bluetooth device (headset, keyboard, printer, etc.) in discoverable mode. Each Bluetooth device may have a different way to make it discoverable. Some have a small button on the headset or keyboard; others may require that you press a key sequence to invoke discovery. Look at the documentation that came with the Bluetooth device or visit the manufacturer’s website for information. 5. After you make the Bluetooth device discoverable, tap Next.
6. When the Bluetooth device is detected, it is shown in the Add Bluetooth Device Wizard Select a device window. If multiple devices are detected, each is shown in the window. Select the device to be connected. Tap Next to add the Bluetooth device. The wizard searches for remote device services. The Wizard will display a message Do you need a passkey to add your device. If your device does not require a passkey, Windows will choose one for you.
7. When the Completing the Add Bluetooth Device Wizard window appears, the Bluetooth installation is nearly complete. Tap Finish to complete the installation. DLI 8800 PRODUCT MANUAL PAGE 28/44 Rev.
Using the USB Has two standard USB, industrial grade connectors. Only DLI authorized peripherals should be attached to these USB ports. The USB port power is rated to 1A. USB Port 1 2 3 4 Pin # Description 1 2 (+5V) Data + 3 Data - 4 GND Using the RS-232 DB9M The integrated RS-232 Port can be configured to work with many peripherals including Barcode Scanners, Printers, ODBII (Vehicle Interface), and Remote Monitoring apparatuses.
4. Set Serial Port to COM1 and Baud Rate to 9600, tap OK. DLI 8800 PRODUCT MANUAL PAGE 30/44 Rev.
5. Save the settings by choosing the Apply button, then tap OK Now you can plug the device into the RS-232 port. DLI 8800 PRODUCT MANUAL PAGE 31/44 Rev.
Using the Barcode Scanner The DLI 8800 is available with an optional integrated barcode imager for scanning barcodes. Honeywell® 5300 Class 2 Standard Range Imager with Cross Hairs (Integrated) The Imager can be configured by using the DLI 8800 KeyMon (See Page 14). To Decode a Barcode 1. Point the top of the DLI 8800 terminal directly at the barcode. The Imager faces straight out of the top panel. The Cross Hairs should be oriented in line with the bar code to achieve optimal decoding.
DLI 8800 Desktop Cradle Overview The DLI 8800 Cradle is a Desktop and Vehicle Cradle all in one. It features a quick release locking mechanism, two bay spare battery charging, flexible mounting, and power options for all types of applications and devices. When the DLI 8800 is seated in the Cradle, the Main Battery is charged in 2 hours. When AC Power is removed from the cradle, the unit can run off the spare batteries in the cradle giving it a total of 12 hours of battery life.
Front Panel Cradle Interface Latches Connection LEDs Button Release to Disengage the Unit from the Cradle Lock Solid green Connection LED indicates connection established with Terminal. Back Panel The I/O and the power supply connector are located on the back of the unit. Power Supply Connector Power Supply Connector The connector is to be used with the DLI series of power supplies. Please see below for a reference of recommended power sources.
Recommended Power Supplies: 5422112880900P 5412202880900P AC Adapter W/Line Cord In-Vehicle Power Adapter, 11~27V DC Input, 4ft Input Cable with In-Line 10AMP ATC Fuse 12ft Output Cable with Barrel Connector Ethernet Communication Port The Ethernet connection supports 10/100mbps communication via a wired LAN. Standard Ethernet cables can be use to attach the cradle to a host system. VGA Port The VGA Connector is for an external display to transfer or mirror what is being displayed on the DLI Device.
Installing the Vehicle Mount Cradle Mounted to the back panel of the Vehicle Cradle is a RAM-202U ball. RAM mounting arms are available for a variety of secure options. When selecting a location to mount the cradle, keep in mind that the power supply, RF connectors and I/O point straight out of the back panel. Side Panel Back Panel RAM-202U Ball K-Lock Power Port, RF and I/O Connectors GPS Power Port Serial Port FME WiFi USB J-BUS Please ensure that you give a minimum of 2.
Shipping your DLI Device Proper way to pack your DLI device DO NOT ship any DLI Device without a proper UPS or FedEx container. The DLI Container is not meant for stand-alone shipping. Place device in foam cover as shown. Place the wrapped DLI device in the correct position in the spacer inside the DLI Container. DLI 8800 PRODUCT MANUAL PAGE 37/44 Rev.
Using a proper UPS or FedEx container, line the bottom with Bubble Wrap, Air Pillows, Packing Foam, etc. Place the closed DLI container inside the lined Shipping Container. Seal the Shipping Container and ship to: Data LTD 703 Data Ltd Parkway La Porte, IN 46350 The dimensions of the box shown are 27x17x10. Fill the rest of the Shipping Container with packing material. DLI 8800 PRODUCT MANUAL PAGE 38/44 Rev.
Technical Assistance If you need assistance installing or troubleshooting, please call your DLI Vendor or the Data Ltd. Inc. Technical Support Office. North America/Canada: Telephone: (800) 526-1299, Ext 774 (8 AM to 4 PM CST) Fax number: (219) 362-1937 E- mail: support@dataltd.com Website: http://www.dataltd.com/html/support-ticket.html Product Service and Repair Data Ltd. Inc. provides service for all its products through service centers throughout North America.
DATA LTD. INC’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT. IN NO EVENT SHALL DATA LTD. INC. BE LIABLE FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF DATA LTD. INC’S ARISING IN CONNECTION WITH ANY PRODUCT SOLD HEREUNDER (WHETHER SUCH LIABILITY ARISES FROM A CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR OTHERWISE) EXCEED THE ACTUAL AMOUNT PAID TO DATA LTD. INC.
DLI 8800 RF terminal is designed to comply with the most current applicable standards on safe levels of RF energy developed by the Institute of Electrical and Electronics Engineers (IEEE) and the American National Standards Institute (ANSI) and has been recommended for adoption by the Federal Communications Commission (FCC). The compliance labels are located on the back of the unit: DLI 8800 WPAN (Bluetooth) DLI 8800 802.
For further information, please contact: Data Ltd. Inc. 703 Data Ltd Parkway P.O. Box 761 La Porte, IN 46352 USA (800) 526-1299 Data Ltd. Inc. shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive FCC Compliance This device complies with Part 15 of the FCC Rules.
Canadian Compliance This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding.
Data Ltd. Inc. 703 Data Ltd. Parkway P.O. box 761 La Porte, IN 46350 Telephone: Fax number: (800) 526-1299 (219) 362-1937 DLI 8800 PRODUCT MANUAL PAGE 44/44 Rev.
