Specifications

DLI 8300 PRODUCT MANUAL PAGE 9/50 Rev. 4
Unpack the Carton and Verify its Contents
Verify that the carton contains the following items:
• DLI 8300 Industrial Tablet Computer (terminal)
• DLI 8300 Battery
If you ordered peripherals and/or accessories, verify that they are also included
with the order.
Be sure to keep the original packaging in case the DLI 8300 needs to be returned for
service– See page 43.
Battery Status LED’s
On Power Source (Charger)
Battery Indicator Light
Status
Description
Power
Solid Green
Powered On
Battery
Solid Green
Capacity level = 100%
Blinking Green
Capacity level > 70%
Blinking Yellow
Capacity level > 20% - < 70%
Blinking red
Capacity level < 20%
Off Power Source (No Charger)
Battery Indicator Light
Status
Description
Power
Solid Green
Powered On
Battery
Solid Green
Capacity level > 70%
Solid Yellow
Capacity level < 70% - > 20%
Solid Red
Capacity level < 20% - > 10%
Blinking red
Capacity level < 10%
For charging, use only Data Ltd. Inc., DLI 8300 peripherals and power cables.
Use of peripherals or cables not sold/manufactured by Data Ltd will void the
warranty and may damage the terminal.
Charging the Battery in the DLI 8300
1. Connect the DLI 8300 to the power supply provided by Data Ltd.
2. The battery will begin charging immediately
3. Charge the batteries for three hours.
The power source consists of two types of battery power: the extended battery pack installed in
the back case and main battery located inside the terminal. If both batteries are attached to the
terminal, the main battery charges first and then the extended battery. If the extended battery is
placed in the terminal the power is drawn from the extended battery first and then the main
battery. Both batteries power the terminal independently which provides the ability to “hot swap”
the extended battery.
Due to the nature of Lithium Ion, be sure to periodically charge your
batteries, as months of inactivity can have a long-term negative effect on the
life of the battery.
The battery will charge even if the terminal is in use as long as AC is
applied to the terminal.