Specifications

DLI 8300 PRODUCT MANUAL PAGE 40/50 Rev. 4
Front Panel
Solid green Connection LED indicates connection established with Terminal.
Bottom Panel
The I/O and the power supply connector are located on the bottom of the unit.
Power Supply Connector
The connector is to be used with the DLI series of power supplies. Please see below for a
reference of those recommended power sources.
The Cradle can be powered by an external DC power source of 18VDC~22VDC. An
optional internal 6VDC~60VDC regulated power supply is available.
Verify that the power source is always within the specification range and
observe correct input voltage polarity. An improper input voltage range
above 22VDC (standard) or above 60VDC directly to battery terminals
(optional) or reverse polarity could damage the power conversion circuitry.
Button Release to
Disengage the Unit
from the Cradle and
Connection LED
Spring Loaded Latch
Cradle
Interface
Quick Release
RF Connectors
Power Supply
Connector