Specifications

DLI 8300 PRODUCT MANUAL PAGE 22/50 Rev. 4
Status Window
The Status window provides status information on the radio.
• Active profile
• Radio’s status: Down (not recognized), Disabled, Not
Associated, Associated, or [EAP type] Authenticated
• Client info: Name, IP address, and MAC address
• AP info: Name, IP address, MAC address, beacon
period, and DTIM interval
• Connection info: Channel, data rate, transmit power,
signal strength, and signal quality
Diags Window
The screen provides Administrative level diagnostics for RF
troubleshooting.
• (Re)connect: Disable and enable the radio, apply or
reapply the current profile, and attempt to associate and
authenticate to the wireless LAN, logging all activity in
the output area at the bottom.
• Release/Renew: Obtain a new IP address through
DHCP release/renew, and log all activity in the output
area at the bottom.
• Start Ping: Start a continuous ping to the address in
the edit box next to it. Once the button is clicked, its
name and function will change to Stop Ping. Moving to
an SCU window other than Status or Diags also will
stop the ping, Pings will continue until you tap the Stop
Ping button, move to an SCU window other than Diags
or Status, exit SCU, or remove the radio.
• Diagnostics: Attempt to (re)connect to an AP, and
provide a more thorough dump of data than is obtained
with (Re)connect. The dump will include radio state,
profile settings, global settings, and a BSSID list of APs
in the area.
• Save To...: Save the diagnostics output to a file.