Owners manual

11
Status
Headlights and
air- condition off ( need to
step the gas pedal when
checking)
Voltage
>13.5
13.2~13.5
13.0~13.2
<13
Data Reference Table
Condition
normal
general
pay attention
check immediately
(12V system)
Headlights and
air- condition on ( need to
step the gas pedal when
checking)
The result can be affected by the defective battery.
13.4~14.6
13.2~13.4
<13.2
normal
pay attention
check immediately
5-6 print the test report
star-up testing, which enable customers more convenient to record and
recheck the value.
5-6-1 procedure of operation
The below picture can be seen after obtaining the value of star-up
testing of the battery:
(1) Press <ENTER> for inquiring if print the report:
DI-215B and DI-215C are designed the test report printing function of
10
5-5-2 Procedure of operation
(1) When the engine is working, connect the red clamp to the positive polar of
the battery, and the black one to the negative polar. Make sure they are well
connected in order to avoid affected result.
(2)Press <▲><▼>to select charging system test as the picture below:
(3)After selecting to get access to the below screen
(4)After operating as step (3) , press <ENTER> to display the maximum load
system test screen as the picture below: the current test voltage is 13.88V,
standard maximum voltage is 15.00V(for 24V system<DI-215C>, standard
maximum voltage is 30.00V) , tested maximum voltage is 14.10V. The other
one indicates the current test voltage is 13.88V, standard minimum voltage is
15.00V(for 24V system<DI-215C>, standard minimum voltage is 26.60V),
tested minimum voltage is 13.58V.
(5)Press <▲><▼>to select highest output screen and lowest output screen.
(6)Press <ESC> to return step (2).
5-5-3 There are some problems in the system
★ If the voltage is high than 15.00V,(for 24V system<DI-215C>, the reading
is over 30.00V), please check the voltage regulator.
★ If the voltage is lower than 13.30V,(for 24V system<DI-215C>, the
reading is under 26.60V), please check the connections, wires and the
engine.