User manual

2
Parts List
(1) DLE-222cc Gas Engine with (2) DLE carburetors
(4) CM6 Spark plugs
(2) Muffl ers with (4) gaskets
(8) 5

20 mm SHCS (muffl er mounting)
(2) Electronic Ignition Modules with additional tachometer lead
(4) 25mm Engine Mounting Standoffs
(8) 6

55 mm SHCS with 6mm lock washers & 6mm fl at washers
(propeller mounting)
(2) Silicone Pick-up Wire Cover / Ignition Wire Cover
(2) Red Three Pin Connector Lead with Pig Tail (ignition kill switches)
(4) Three Pin Connector Securing Clips
(1) DLE-222 Decal Set
(2) Brass Pressure Fittings (smoke system use/not included)
Safety Tips and Warnings
● This engine is not a toy. Please place your safety and the safety
of others paramount while operating. DLE will not be held
responsible for any safety issues or accidents involving this engine.
● Operate the engine in a properly ventilated area.
● Before starting the engine, please make sure all components
including the propeller and the engine mount are secure and
tight. It is strongly recommended that a screw sealant is used
(Great Planes Threadlocker GPMR6060) during engine installation.
● During the break-in period, it is recommended that the engine be
installed on the aircraft or a test stand with an appropriate shock