User manual

2
Parts List
(1) DLE-170cc Gas Engine w/ DLE carburetor
(2) DLE (CM-6 size) Spark plugs
(2) Muffl ers w/(2) gaskets
(4) 5x20mm SHCS (muffl er mounting)
(1) Electronic Ignition Module w/additional tachometer lead
(4) 20mm Engine Mounting Standoffs
(6) 6x55mm SHCS with 6mm lock washers & 6mm fl at washers
(propeller mounting)
(2) Silicone Pick-up Wire Cover/Ignition Wire Cover
(1) Red Three Pin Connector Lead w/ Pig Tail (ignition switch)
(2) Three Pin Connector Securing Clips
(1) DLE-170 Decal Sheet
(2) Brass Pressure Fittings (smoke system use/not included)
Safety Tips and Warnings
● This engine is not a toy. Please place your safety and the safety
of others paramount while operating. DLE will not be held
responsible for any safety issues or accidents involving this engine.
● Operate the engine in a properly ventilated area.
● Before starting the engine, please make sure all components
including the propeller and the engine mount are secure and
tight. It is strongly recommended that a screw sealant is used
(Great Planes Threadlocker GPMR6060) during engine installation.
● During the break-in period, it is recommended that the engine be
installed on the aircraft or a test stand with an appropriate shock