User guide

9
CATV:
-c, --catv=(1|0)
Turns on/off the CATV module.
Unicast:
--add-uca=PORT:aa:bb:cc:dd:ee:ff
Adds the Ethernet address statically into the ATU.
--add-uca-ext=PORT:aa:bb:cc:dd:ee:ff
Adds the Ethernet address statically into the ATU.
Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.
--del-uca=aa:bb:cc:dd:ee:ff
Removes the Ethernet address from the ATU.
--dump-atu
Dumps the current content of the ATU, Ethernet addresses and Port no.
Multicast:
--add-mca=PORT:aaa.bbb.ccc.ddd
Adds the IP multicast address statically to the ATU.
--add-mca-ext=PORT:aaa.bbb.ccc.ddd
Adds the IP multicast address statically to the ATU.
Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.
--del-mca=PORT:aaa.bbb.ccc.ddd
Removes the IP multicast address from the ATU.
--del-mca-ext=PORT:aaa.bbb.ccc.ddd
Removes the IP multicast address from the ATU.
Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.
--enable-port-block-unknown-multicast=PORT:(1|0)
Blocks all Ethernet frames with Destination Address not present in the ATU.
--enable-port-block-unknown-multicast-ext=PORT:(1|0)
Blocks all Ethernet frames with Destination Address not present in the ATU.
Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.
--get-enable-port-block-unknown-multicast=PORT
Prints the status of blocking all Ethernet frames with Destination Address not
present in the ATU.
--get-enable-port-block-unknown-multicast-ext=PORT
Prints the status of blocking all Ethernet frames with Destination Address not
present in the ATU.
Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.
--enable-port-igmp-snooping=PORT:(1|0)
Enables/disables IGMP snooping for the individual port.
--enable-port-igmp-snooping-ext=PORT:(1|0)
Enables/disables IGMP snooping for the individual port.
Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.
--get-enable-port-igmp-snooping=PORT
Prints the status if IGMP snooping is enabled for the port.
--get-enable-port-igmp-snooping-ext=PORT
Prints the status if IGMP snooping is enabled for the port.
Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.