User guide

67
HT_RDG Applicable to HT Physical Mode, Reverse Direc-
tion Grant (RDG). This is the 11n performance
parameter. Enable it if needed.
1
HT_LinkAdapt Applicable to HT Physical Mode 0
HT_OpMode Applicable to HT Physical Mode 0
HT_MpduDensity Applicable to HT Physical Mode 5
HT_EXTCHA Applicable to HT Physical Mode 1
HT_BW Applicable to HT Physical Mode 1
HT_AutoBA Applicable to HT Physical Mode, Auto Block ACK.
It is another aggregation technique which
prevents sending ACK in the communication
to increase the throughput. If this option is
enabled, the device will activate this function
when transmitting massive data.
1
HT_BADecline Applicable to HT Physical Mode, Decline BA
Request, Enable this option to decline the Block
ACK request addressed by the other devices.
0
HT_AMSDU Applicable to HT Physical Mode, Aggregation
MSDU (A-MSDU). The multiple HT packets can
be transmitted with single ACK reply packet.
Enable it to apply this function and reduce the
network congestion.
0
HT_BAWinSize Applicable to HT Physical Mode 64
HT_GI Applicable to HT Physical Mode 1
HT_STBC Applicable to HT Physical Mode 1
HT_MCS Applicable to HT Physical Mode 33;33;33;33
HT_PROTECT Applicable to HT Physical Mode 1
HT_MIMOPS Applicable to HT Physical Mode 3
HT_40MHZ_INTOLERANT Applicable to HT Physical Mode 0
HT_TxStream Applicable to HT Physical Mode 2
HT_RxStream Applicable to HT Physical Mode 2
NintendoCapable 0
AccessPolicy0 0
AccessControlList0 -
AccessPolicy1 0
AccessControlList1 -
AccessPolicy2 0
AccessControlList2 -
AccessPolicy3 0
AccessControlList3 -
WdsEnable Thisdevicesupports“AccessPoint”,“APallows
WDS”,“Bridge”and“Repeater”.Whenselect-
ing“Bridge”,thisdeviceprovidesWDSconnec-
tion only and doesn’t provide radio to the WLAN
stations (clients). To provide both AP and WDS
connections,select“Repeater”.
0