User guide

63
wan_pptp_ip applicable to Router Operation Mode, Point-to-
pointtunnelingprotocol,IPAddressoftheWi
192.168.2.1
wan_pptp_netmask applicable to Router Operation Mode, Point-to-
point tunneling protocol, Subnet mask of the
Wi
255.255.255.0
wan_pptp_gateway applicable to Router Operation Mode, Point-
to-point tunneling protocol, IP Address of the
Gateway
192.168.2.254
lan_ipaddr LANIPAddressoftheWi 192.168.1.250
lan_netmask SubnetmaskoftheWi 255.255.255.0
dhcpEnabled DHCP Server functionality, Enable or Disable.
ClientsconnectedtotheWiwillgettheirIP
AddressedbytheWi.
0 (Disable)
dhcpStart Applicable to DHCP Enable, Start IP Address in
the range
192.168.1.100
dhcpEnd Applicable to DHCP Enable, Stop IP Address of
the rante
192.168.1.200
dhcpMask Applicable to DHCP Enable, Subnet mask 255.255.255.0
dhcpPriDns Applicable to DHCP Enable, Primary DNS Server
IP Address
168.95.1.1
dhcpSecDns Applicable to DHCP Enable, Secondary DNS
Server IP Address
168.95.192.1
dhcpGateway Applicable to DHCP Enable, IP Address of the
Gateway
192.168.1.250
dhcpLease Applicable to DHCP Enable, this is the DHCP
lease time. When it is short, the issued IP ad-
dress to DHCP clients will be updated frequent-
ly. It is recommended to keep default setting
except for another purpose
86400 (24 hrs)
stpEnabled Spanning Tree 0
lltdEnabled Link Layer Topology Discovery, Enable or Disable 0
igmpEnabled IGMP functionality, Enable or Disable 0
natEnabled NAT functionality, Enable or Disable 1
IPPortFilterEnable IPbasedportltering,EnableorDisable 0
IPPortFilterRules IPbasedportltering,Rules -
PortForwardEnable Port Forwarding, Enable or Disable 0
PortForwardRules Port Forwarding, Rules -
MacFilterEnable MAC Filtering, Enable or Disable -
MacFilterRules MAC Filtering, Rules -
DefaultFirewallPolicy 1
DMZEnable De-Militarized Zone, Enable or Disable 0
DMZIPAddress Input the IP Address of the computer that you
want to expose to Internet.
-
TZ -
NTPServerIP IP Address of the NTP Server -
NTPSync -