User guide

49
Parameter Description Default
ipbx call waiting tone 1 Non-blocking call waiting #1
single tone pattern
{1, 2, 0, {440, -16}, {300, 9700}}
ipbx call waiting tone 2 Non-blocking call waiting #2
single tone pattern
{1, 6, 0, {440, -16}, {100, 20,
100, 20, 100, 9660}}
ipbx call waiting tone 3 Non-blocking call waiting #3
single tone pattern
{1, 4, 0, {440, -16}, {100, 100,
100, 9700}}
ipbx call waiting tone 4 Non-blocking call waiting #4
single tone pattern
{1, 6, 0, {440, -16}, {100, 100,
100, 100, 100, 9500}}
ipbx call waiting tone 5 Non-blocking call waiting #5
single tone pattern
{1, 2, 0, {620, -16}, {300, 9700}}
ipbx call waiting tone 6 blocking call waiting #6 single
tone pattern
{1, 6, 0, {620, -16}, {100, 20,
100, 20, 100, 9660}}
ipbx call waiting tone 7 Non-blocking call waiting #7
single tone pattern
{1, 4, 0, {620, -16}, {100, 100,
100, 9700}}
ipbx call waiting tone 8 Non-blocking call waiting #8
single tone pattern
{1, 6, 0, {620, -16}, {100, 100,
100, 100, 100, 9500}}
SLAC Conguration:
Parameter Description Default
slac port impedance Synthetic impedance matching
network control for a choice of
one in ten common world-wide
congurations
600 ohm
slac port rx gain (GR) SLAC receive gain in dB units -3
slac port tx gain (GX) SLAC transmit gain in dB units 6
slac audio clamp slac caller id type 1 mode Caller
ID type 1 (on-hook) mode (None,
Belcore MDMF, SDMF, ETSI WINK,
ETSI RING and DTMF)
Belcore MDMF
slac caller id type 2 mode Caller ID type 2 (off-hook) mode
(None, Belcore MDMF, SDMF, ETSI
WINK, ETSI RING and DTMF)
Belcore MDMF
slac message waiting mode Message waiting mode (None,
Belcore VMWI, ETSI, DTMF)
Belcore VMWI
slac ring type Selects ring waveform type of
sinusoidal or trapezoidal
sinusoidal
slac ring frequency Ringer frequency in Hz (zero
to use ring pattern frequency
specication)
slac ring transition Trapezoidal transition time in
msec
15
slac ring amplitude Ringer voltage in volts 85