User guide

ing. This value is only used if the default ringer parameter slac_ring_frequency is zero.

•no_of_times is the total of both on and off transitions in the ring pattern. This can be zero for a con-

tinuous ring signal (which may not be desirable and may exceed the rated power capacity of the ATA).

•duration is the length of time in seconds to ring. A value of zero means until instructed otherwise.

• ring_on_timeX and ring_off_timeX are interleaved Ring On and Ring Off durations in msec. A

value of zero for a Ring On time indicates a continuous tone. A value of zero for a Ring Off time produces

continuous silence.

Possible values for frequency are between 0-60Hz. The maximum total of on and off times summed to-

gether is 9.

Parameter Description Default

ipbx call ring default Default ring pattern {20, 2, 0, {2000, 4000}}

ipbx call station ring default Default station call ring pattern {20, 2, 0, {1000, 3000}}

ipbx call holding rering Call on hold reminder re-ring

pattern

{20, 2, 0, {500, 0}}

ipbx call back ring Call back success ring pattern {20, 2, 0, {1500, 0}}

ipbx call back ring splash Call back in progress ring pattern {20, 2, 0, {700, 0}}

ipbx call forward ring splash Call forward reminder ring pat-

tern

{20, 2, 0, {500, 0}}

ipbx message waiting ring

splash1

Audible message waiting ring

pattern

{20, 2, 0, {500, 0}}

Distinctive Ringing Patterns:

The distinctive ring feature allows a different ring to be sent to the telephone as per the values of the

Distinctive Ring parameters 1 - 8. Support for up to 8 distinctive rings is available to the user. The syntax

for each of the distinctive ring parameters is the same as the default ring parameter where the frequen-

cy, number of On/Off transitions, and the Ring On/Ring Off times can be set as desired.

Parameter Description Default

ipbx distinctive ring 1 Distinctive ring pattern #1 {20, 2, 0, {2000, 4000}}

ipbx distinctive ring 2 Distinctive ring pattern #2 {20, 4, 0, {1000, 1000, 1000,

3000}}

ipbx distinctive ring 3 Distinctive ring pattern #3 {20, 6, 0, {300, 200, 1000, 200,

300, 4000}}

ipbx distinctive ring 4 Distinctive ring pattern #4 {20, 4, 0, {800, 400, 800, 4000}}

ipbx distinctive ring 5 Distinctive ring pattern #5 {20, 4, 0, {400, 200, 400, 2000}}

ipbx distinctive ring 6 Distinctive ring pattern #6 {20, 2, 0, {1000, 3000}}

ipbx distinctive ring 7 Distinctive ring pattern #7 {20, 4, 0, {300, 200, 1500, 2000}}

ipbx distinctive ring 8 Distinctive ring pattern #8 {20, 4, 0, {800, 400, 800, 2000}}

Distinctive Call Waiting Patterns:

A distinctive call waiting tone is played when an incoming call arrives while the phone is in use. Support

for up to 8 distinctive call waiting tone patterns is available. The syntax for each of the distinctive call

waiting tone parameters is the same as the default call waiting tone parameter where the number of

tones, number of On/Off transitions, Frequency/Signal level pairs and the tone On/Off times can be set

as desired.