User guide

26
switch --set-ieee-queue-map=3:1 # ToS value of 3 will go to queue with low pri-
ority
switch --set-ieee-queue-map=2:1 # ToS value of 2 will go to queue with low pri-
ority
switch --set-ieee-queue-map=1:0 # ToS value of 1 will go to queue with lowest
priority
switch --set-ieee-queue-map=0:0 # ToS value of 0 will go to queue with lowest
priority
Usingatrafcanalyzer,wherewehavedened8trafcclasses,eachsending12.5%inanoversubscrip-
tionconguration,wecanseethatClass_0programmedwithToSvalue=7,Class_1programmedwith
ToSvalue=6…Class_7programmedwithToSvalue=0willbeprioritizedaccordingtothespecication
above.
The same goes for Differentiated Services, where the value can be between 0 – 63.
switch --set-port-ip4ip6-priority-field=0:1 #Enables prioritization for WAN
port
switch --set-port-ip4ip6-priority-field=1:1 #Enables prioritization for LAN
port1
switch --set-port-ip4ip6-priority-field=2:1 #Enables prioritization for LAN
port2
switch --set-port-ip4ip6-priority-field=3:1 #Enables prioritization for LAN
port3
switch --set-port-ip4ip6-priority-field=4:1 #Enables prioritization for LAN
port4
switch --set-port-ip4ip6-priority-field=5:1 #Enables prioritization for CPU
port
# applicable to 7/8 port models only
switch --set-port-ip4ip6-priority-field-ext=1:1 #Enables prioritization for LAN
port 5
switch --set-port-ip4ip6-priority-field-ext=2:1 #Enables prioritization for LAN