User guide

15
Prints the port based VLAN mapping
--get-port-vlan-table=port
Prints the port based VLAN mapping
Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.
RMON:
--get-rmon-histogram-mode
Sets the mode for the RMON counters.
0 = Rx only, 1 = Tx only, 2 = Sum of Rx and Tx.
--set-rmon-histogram-mode=MODE
Sets the mode for the RMON counters.
Mode must be between 0 and 2; 0 = Rx only, 1 = Tx only, 2 = Sum of Rx and Tx.
--flush-all-rmon-counters
Flushes all counters on all ports.
--flush-port-rmon-counters=PORT
Flushes all counter for a single port.
--flush-port-rmon-counters-ext=PORT
Flushes all counter for a single port.
Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.
--get-port-rmon-counters=PORT, Prints the RMON counters for a port.
--get-port-rmon-counters-ext=PORT, Prints the RMON counters for a port.
Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.
DHCP Option 82:
--set-port-dhcp-option82=PORT:enable[:<optional text>]
--set-port-dhcp-option82-ext=PORT:enable[:<optional text>]
Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.
Enable or disable DHCP option 82 (DHCP relay agent).
1=enable, 0=disable
The optional text will be written in the “Option82 Agent Circuit ID
Sub-option” field. If the optional text contains white space, the text must be
enclosed in “”.
--get-port-dhcp-option82=PORT
--get-port-dhcp-option82-ext=PORT
Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.
Is DHCP option 82 (DHCP relay agent) enabled?
1=enable, 0=disable
“Option82 Agent Circuit ID Sub-option” text.