User guide

QoS:

--set-port-ieee-tag-priority=PORT:(1|0)

Enables prioritized frames based on their IEEE priority tags

--set-port-ieee-tag-priority-ext=PORT:(1|0)

Enables prioritized frames based on their IEEE priority tags

Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.

--get-port-ieee-tag-priority=PORT

Prints the status of Enable prioritized frames based on there IEEE priority

tags

Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.

--set-port-ip4ip6-priority-field=PORT:(1|0)

Enables prioritized frames based on their IP4/IP6 priority fields

--set-port-ip4ip6-priority-field-ext=PORT:(1|0)

Enables prioritized frames based on their IP4/IP6 priority fields

Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.

--get-port-ip4ip6-priority-field=PORT

Prints the status of Enable prioritized frames based on their IP4/IP6 priority

fields

--get-port-ip4ip6-priority-field-ext=PORT

Prints the status of Enable prioritized frames based on their IP4/IP6 priority

fields

Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.

--set-port-map-rule=PORT:(1|0)

This makes IEEE tags to used priority to IP4/IP4 fields if both exists.

--set-port-map-rule-ext=PORT:(1|0)

This makes IEEE tags to used priority to IP4/IP4 fields if both exists.

Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.

--get-port-map-rule=PORT

Prints the status of if IEEE tags is prioritized over IP4/IP4 fields if both

exists.

--get-port-map-rule-ext=PORT

Prints the status of if IEEE tags is prioritized over IP4/IP4 fields if both

exists.

Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.

--set-ieee-queue-map=PRIO:QUEUE

Used to map IEEE tag priority 0-7 to internal queue 0-3.

--get-ieee-queue-map=PORT

Prints the queue of a mapped IEEE tag priority.

--get-ieee-queue-map-ext=PORT

Prints the queue of a mapped IEEE tag priority.

Applicable to 7/8 port models only. Port 1…4 covers LAN port 5…8.

--set-ip4ip6-queue-map=PRIO:QUEUE