Manualshelf

Use and Care Manual

ManualsBrandsDK2 ManualsAutomotive1950 lbs. Capacity 6 ft. x 10 ft. Open Rail Utility Trailer Kit with 48 in. Drive-Up Gate
11121314151617181920
12 MMT6X10 man
ENGLISHENGLISH
ASSEMBLYASSEMBLY
STEP 6STEP 6
PRE-WIRING INSTALLATION
The wiring is pre-assembled under the frame, and must be connected to the harness that connects to
the front of the trailer drawbar (31).
STEP 7STEP 7
FLIPPING THE TRAILER
Flip the trailer over with help and install the fenders.
WARNING: Rolling the trailer over will require assistance. The trailer at this point weighs
approximately 583 lbs / 265 kg
STEP 8STEP 8
FENDER ASSEMBLY
1. Attach the fenders using M10 x 70 (17) bolts and the L-brackets (9) as shown (Fig. 7).
2. Use the M8 x 25 (14) bolts to connect the fenders between the front and rear L-brackets (9).
14
10
917
Fig. 7
Item N
o.
Description Qty.
17 Hex M10 x 70 bolts & nuts (set) 4
9 Fender bracket 4
14 Hex M8 x 25 bolts & nuts (set) 8
10 Fender 1