Full Product Manual

10 | MMT4X6OG man.

 CAUTION: TRAILER CAPACITY

• Never overload your trailer. Each trailer has a maximum payload that should not be

exceeded. Overloading your trailer could cause serious damage to your trailer as well

as the towing vehicle. Please refer to your trailer serial/certiﬁcation label located on the

same frame of the trailer for capacity details.

• The Gross Vehicle Weight Rating (G.V.W.R.) is the weight of the trailer + the maximum

payload the trailer can carry. The trailer weight and the payload must not exceed this

weight rating.

• Be sure that any load carried in your trailer does not extend beyond the frame of your

trailer. Never place loads on one side only.

 CAUTION: TONGUE WEIGHT

• The tongue weight is 10% of the load (this does not include the weight of the trailer).

• The load is divided so that 90% of the load is over the axle and 10% is over the tongue.

TRAILER COUPLER

LOCKED UNLOCKED

TO ADJUST COUPLER TO BALL:

Set the coupler and tongue onto the 2-inch trailer ball on your vehicle. Raise the locking lever,

push up on the channel lock and turn nut to tighten or loosen the coupler. Proper adjustment is

obtained when the coupler is as tight as possible on the ball and the locking lever can still be

opened and closed.

 NOTICE: Before towing your trailer be sure to check the capacity of your trailer hitch

on your vehicle (never exceed this or your trailer’s capacity).

The DK2 Inc. Trailer is equipped with a 2-inch coupler and must be used with 2-inch

trailer ball. Make sure that the trailer ball is completely engaged in the coupler ball.

ENGLISH