Use and Care Manual

v.200615 7
ENGLISHENGLISH
ASSEMBLYASSEMBLY
STEP 1
STEP 1
BED ASSEMBLY
Lay the front bed (26) and rear bed (21) as shown. Note the location of the marker lights holes in the
front side rails. See g.1
1. Use M10 x 20 hex head bolts and nuts (34) to mount the 8 stake pockets (40) to the trailer as
shown.
2. Use M10 x 20 hex head bolts and nuts (34) to mount the inside hinge (27) to the front bed (26) and
the outside hinge (28) to the rear bed (31);
NOTE: Do not join the hinges from front to rear bed halves yet.
3. Keep the two center M10 x 20 hex head bolts and nuts (34) to connect the bed halves aside until
you are ready to join the bed halves and make the trailer one solid deck.
NOTE: Do not join the bed halves until later in the assembly process, set the rear bed half
aside for later in the assembly.
Item N
o.
Description Qty.
34 Hex M10 x 20 & nut (set) 28
40 Stake pocket 8
28 Outside hinge 2
27 Inside hinge 2
34
40
40
40
34
28
27
40
27
28
34
34
34
�ig.1