Use and Care Manual

v.200615 23

ENGLISHENGLISH

SAFE USE AND OPERATION RULES

Step 4

Secure the sections together using a bungee or rope. Make sure the trailer cannot open

up while tipping onto castors for storage.

Step 5

Remove the wheel chocks from the trailer tires and tilt the trailer onto its casters (g.11).

Make sure you get the assistance of 1 or 2 additional people. Do not try

this on your own.

Step 6

Be careful when transporting trailer on caster wheels. The trailer can tip if you

aren’t careful balancing the weight.

Make sure you get the assistance of 1 or 2 additional people.

Step 7

The trailer is now ready to store against a wall. It is recommended you secure

the trailer to avoid any movement while stored.

MAINTENANCE

z Check and maintain the trailer, coupler, ball and hitch before each use and

every 200 miles (322 km).

z Inspect coupler, hitch and ball for damage before each use.

z Ball or hitch can be damaged in parking, hitting curbs, dragging when

crossing ditches or railroad tracks.

z Check safety chains and hooks for wear and do not allow safety chains to drag on ground.

z To prevent bearing damage, disassemble and repack wheel bearing with a good grade of wheel

bearing grease every 2000-3000 miles (3200 - 4800 km) or yearly.

z If you do not know how to repack wheel bearing, take your trailer to a qualied technician.

IMPORTANT: The purpose of the following notices is to give you tips on safe use and

operation of your utility trailer.

1. PLEASE READ the instructions carefully and follow them step-by-step for easy assembly. Please

keep this instruction.

2. PLEASE DOUBLE CHECK THE ASSEMBLY step-by-step to be sure each is followed.

3. BEFORE USING, PLEASE INSPECT your trailer.

4. DO NOT REMOVE THE VIN STICKER from the tow bar.

�ig.11