Use and Care Manual
v.200615 11
ENGLISHENGLISH
ASSEMBLYASSEMBLY
STEP 5
STEP 5
SPRING AND AXLE ASSEMBLY
1. Place 3 leaf spring (8) into spring hanger with eye forward, towards the drawbar of the trailer. Install
M14 x 85 (9) go through spring hanger, and spring eye and lock with M14 nyloc nut.
2. Install M14 x 85 go through spring tail and spring hangers and lock with M14 nyloc nut.
3. Place Axle (7) onto spring (8) with hole in axle over peg on spring. Fasten Axle to each spring with
two U bolts (9), spring plate (6) and lock with four M10 nuts as shown.
Item N
o.
Description Qty.
6 Spring plate 2
7 Axle 1
8 3-leaf spring 2
9 U-bolt M10 x 85 & nuts (set) 4
20 Hex bolt M14 x 85 &
nyloc nut (set)
4
�ig.5