Technical data

Functions
6
DME
3
3. Functions
Overview of functions
★ When dosing crystallising media, a diaphragm leakage sensor must be installed. DME-B is not suitable for crystallising media.
DME 60-940 B DME 60-940 AR DME 60-940 AP
TM04 8827 1413 TM04 8826 1413 TM04 8789 1313
Capacity control, see page 11
Internal stroke-frequency control ●●●
Internal stroke-speed control ●●●
Control panel, see page 8
Capacity setting in litres, millilitres or US gallons ●●●
Display with background light and soft-touch buttons ●●●
Easy set-up menu with language options ●●●
On/Off button ●●●
Maximum capacity button (priming) ●●●
Green indicator light for operating indication ●●●
Red indicator light for fault indication ●●●
Control panel lock ●●●
Side-fitted as an option ●●●
Operating modes, see page 11
Manual control ●●●
Pulse control ●●
Analog 0/4-20 mA control ●●
Timer-based batch control ●●
Pulse-based batch control ●●
Functions, see page 12/14
Dosing monitoring ●●
Dual-level control ●●
Calibration of pump for the actual installation ●●●
Anti-cavitation (reduced suction speed) ●●●
Capacity limitation ●●●
Counters for strokes, operating hours and power on/off ●●●
Fieldbus communication ●
Overload protection ●●●
Error message in display ●●●
Diaphragm leakage sensor ★ ●●
Dosing signal output ●●
Power supply, see page 14
Switch-mode power supply ●●
Inputs/outputs, see page 17/17
Input for pulse control ●●
Input for analog 0/4-20 mA control ●●
Input for dual-level control ●●
Input for external start/stop ●●
Alarm relay output (variant AR) ●●
Dosing output ●●
Input for external on/off switch ●●