Technical data

General data

DME

Digital Dosing

Digital Dosing represents state-of-the-art technology.

This patented Grundfos solution sets new standards,

including new principles and methods.

Fig. 2 DME pumps

Precise and easy setting

The operator can easily install and set the pump to

discharge exactly the quantity of dosing liquid required

in the application. In the display, the setting of the

pump is read out directly in ml/h or l/h, pulse or batch,

and the operation mode is easily identified by means

of icons.

Unique technology

A unique drive and microprocessor control ensure that

dosing liquids are discharged precisely and with low

pulsation even when the pump is operating with high

viscosity or degassing liquids. Instead of the

conventional stroke length adjustment, the capacity of

the DME is regulated by automatic adjustment of the

motor speed during the discharge stroke and by fixed

suction stroke speed, ensuring optimal and uniform

mixing.

Fewer variants to cover all needs

The pumps feature a powerful variable speed motor, a

turn-down ratio of 1:800 and a complete control

interface including:

• Full pulse control

• Pulse batch control

• Internal timer batch control

• Analog 0/4-20 mA control

• Level control

• Fieldbus communication module.

This ensures that the DME pumps cover the range

from 60 to 940 litres per hour up to 10 bar. The switch

mode power supply ensures that the same pump is

working precisely, irrespective of the mains supply

(100-240 V, 50/60 Hz).

The DME dosing pumps feature diaphragm dosing

head with integrated vent valve, suction and discharge

ball valves. The pumps are fitted with power cable and

plug.

TM04 8479 0612