Specifications

3
Multistage Ejector Series ZL
ZSE4-00--X105 ZSE4B-00--X105 ZSE4E-00--X105
Part number
Display
Pressure setting range
Maximum operating pressure
Operation indicator light
(lights up when ON)
Response frequency
Hysteresis
Fluid
Temperature characteristics
Repeatability
Operating voltage
Current consumption
Pressure indication
Self diagnostic function
Operating temperature range
Noise resistance
Withstand voltage
Insulation resistance
Vibration resistance
Impact resistance
Green
25mA or less
45mA or less
–26, –27: 50mA or less
–67: 60mA or less
Variable (3 digits or more) Variable (can be set from 0)
OUT1: Green
OUT2: Red
LCD LEDLCD with back light
Option Specifications
Digital vacuum pressure switch specifications
Output specifications
With digital vacuum
pressure switch
(ZSE4)
– 101 to 10KPa {–760 to 75mmHg}
200KPa
200Hz (5ms)
Fixed (3 digits)
Air, Non-corrosive gas
±3% F.S. or less
±1% F.S. or less
12 to 24VDC (ripple ±10% or less )
3 1/2 digits (character height 8mm)
(Over current
Note 1)
), Over pressure, Data error, Presence of pressure at 0 clear
0 to 50°C (with no condensation)
500Vp-p, Pulse width: 1µS, Start up: 1nS
Between external terminal batch and case: 1000VAC 50/60Hz for 1 min.
Between external terminal batch and case: 2MΩ (at 500VDC)
2hrs. each in X, Y, Z directions at smaller of 10 to 500Hz
with amplitude 1.5mm, or acceleration 10G
100G in X, Y, Z directions, 3 times each
Hysteresis mode
Window comparator mode
Note 1) Not available on analog output type.
∗ Refer to CAT.E824-A "Pressure Switch" for details on switches.
∗ Refer to CAT.E824-A "Pressure Switch" for details on switches.
ZSE4
ZSE4B
ZSE4E
–25 (L)
–26 (L)
–67 (L)
–26 (L)
–27 (L)
–67 (L)
1 output NPN open collector 30V, 80mA or less
Analog output (1 to 5V)
1 output PNP open collector 80mA or less
Analog output (1 to 5V)
2 outputs NPN open collector 30V, 80mA or less
2 outputs PNP open collector 80mA or less