Technical data

Chapter 4 Digital output modules Manual VIPA System 200V
4-12 HB97E - SM - Rev. 09/19
222-1BF50 - DO 8xDC 24V 0.5A NPN
DO 8xDC 24V 0.5A NPN VIPA 222-1BF50
The digital output module accepts binary control signals from the central
bus system and controls the connected loads at the process level via Misfit
outputs. It provides 8 channels that operate as Low-Side switches and that
are interconnected via the load voltage. Low-Side switches are suitable for
the control of grounds. When a short circuit occurs between the switched
line and ground the result is that the load is activated until the short circuit
has been removed. Short circuits do not place an additional load on the
supply voltage.
• 8 Low-Side outputs
• Output current per channel 0.5A
• Suitable for small motors, lamps, magnetic valves and contactors
1
2
3
4
[1]
[2]
[3]
[4]
Label for module description
Label for the bit address with
description
LED status indicator
Edge connector
LED
L+
.0 ... .7
F
Description
LED (green)
Supply voltage available
LEDs (green)
Q+0.0 to Q+0.7
when an output is active
the respective LED is
turned on
LED (red)
Overload, overheat or
short circuit error
DO 8xDC24V NPN
SM 222
L+
.0
.1
.2
.3
.4
.5
.6
.7
F
VIPA 222-1BF50
X2
34
1
2
3
4
5
6
7
8
9
I0
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
DC 24V supply voltage
Output Q+0.0
Output Q+0.1
Output Q+0.2
Output Q+0.3
Output Q+0.4
Output Q+0.5
Output Q+0.6
Output Q+0.7
Supply ground
Order data
Description
Properties
Construction
Status indicator
pin assignment